Just to add that the YSS PD Valves are now installed I adjusted them to 5 threads showing at the bottom, and used 10W silkolene fork oil, with a 130 mm air gap measured with the valves in place - I could find any info. on whether this should be measured with or without the valves, and in hindsight I probably should have measured the air gap without the valves. Was about 420ccs.
Anyway we'll see how it feels. Oh and I didn't cut the preload spacers at all, considering adding a bit of preload will be OK.
I also changed both headlight bulbs - after Libby broke them both at the weekend. So much messing about with the lights, that the battery couldn't cope with starting it this morning....
Anyway we'll see how it feels. Oh and I didn't cut the preload spacers at all, considering adding a bit of preload will be OK.
I also changed both headlight bulbs - after Libby broke them both at the weekend. So much messing about with the lights, that the battery couldn't cope with starting it this morning....
No comments:
Post a Comment