Suzuki RG 500 1987
Engine :
Tuned by Mark Dent
Carburetors : Mikuni TM34 240 Mains at front, 250 mains at rear with 30 pilots
Rotary valves : 116mms Maranello standard duration steel valves in billet 116 covers
Clutch plates : Kawasaki ZXR 600 kevlar plates
Clutch thrust washer (special Dave rgv250.co.uk)
Honda CR125 pistons 1983/84
Top crankcase flowed for the 116mm rotary disks (Classic Moto Racing)
NOVA gearbox (Ipone synthetic oil)
Cranks rebuilt by Gonin Moteurs (Lyon) and now built by ALCO and now by Sylvain with thrust washers on the big end, thereby negating the need for thrust washers in the pistons.
Billet gearchange plate
Zeeltronic Ignition controller and Exhaust Valve controller
MD adjustable ignition pickup (+4 degrees)
Joly Moto expansion chambers
Frame :
Suzuki GSXR 750 1989 forks 43mm, front wheel, rear wheel, Nissin brakes from same machine
Bodywork LM Productions slim fairing - now replaced with standard fairing from Poly26
Hagon shock
Tyres : Michelin Power1 or Pirelli Supercorsa SC1 (160 rear, 120 front)
Yamaha RD350YPVS (31K) 1983
Engine:
Tuned by Stan Stephens
Carburetors : Mikuni VM32
Crank Rebuilt by Alco (Laurent Badie) Racing
8mm reedblock spacers
Vforce reed blocks
Zeeltronic ignition and exhaust valve controller with DCI-11 charger
LI-FE battery cell
Gibson race expansion chambers
Frame :
Rear sub frame shortened
Center stand tabs removed (more space for expansion chambers)
Hagon shock
Racetech Gold Valve converted front fork
Fork, yokes and brakes from a 1WT 35 mm diameter
Wheels F2
Tyres : Avon 130 AM23 (130/650 VB18) rear 110 AM22 (110/80-18) front
Yamaha FZR600 Genesis 3HE 1990
Shock factory shock lifting the rear slightly.
Fork oil changed, and gold valves fitted (YSS)
K&N air filter plus factory pro needles and needle jets and bigger main jets, oil filter oil (Castrol 10W40)
Carbs balanced June 2015
BT45 at the back (fixed the white lining).
Forks : YSS gold valves with the standard fork springs, and spacers
Shock Factory rear shock (raised slightly 1.5cms)
K&N filters
FZR1000 belly pan
FZR 600 race seat unit (Poly26)
FZR top fairing standard
Blue spot calipers from a Fazer
Fork oil changed, and gold valves fitted (YSS)
K&N air filter plus factory pro needles and needle jets and bigger main jets, oil filter oil (Castrol 10W40)
Carbs balanced June 2015
BT45 at the back (fixed the white lining).
Yamaha FZR600 Genesis 3HE 1991
Preparation for a track bikeForks : YSS gold valves with the standard fork springs, and spacers
Shock Factory rear shock (raised slightly 1.5cms)
K&N filters
FZR1000 belly pan
FZR 600 race seat unit (Poly26)
FZR top fairing standard
Blue spot calipers from a Fazer
No comments:
Post a Comment