Just to record some changes really.
Put new wheel bearings in the 350 and the FZR, hopefully that will stop the noise on the FZR. The wheel spacers I built for the 350 are a reasonable fit, but I need to keep an eye on the right hand side disk caliper as it is pretty close to the disk. Also had a new rear tyre fitted to the FZT a Pirelli Super Demon. It's a 130/70/18.
I also moved the needles on the Ducati up one slot, they were in the middle and are now at the bottom clip setting, I also replaced the faulty plug cap (zero resistance), and also tightened the carb manifolds (on the cylinder) which were loose and visibley leaking a touch - this could be the reason it seems to be running weak and popping and farting a lot, will test this weekend to see if anything changes.
Put new wheel bearings in the 350 and the FZR, hopefully that will stop the noise on the FZR. The wheel spacers I built for the 350 are a reasonable fit, but I need to keep an eye on the right hand side disk caliper as it is pretty close to the disk. Also had a new rear tyre fitted to the FZT a Pirelli Super Demon. It's a 130/70/18.
I also moved the needles on the Ducati up one slot, they were in the middle and are now at the bottom clip setting, I also replaced the faulty plug cap (zero resistance), and also tightened the carb manifolds (on the cylinder) which were loose and visibley leaking a touch - this could be the reason it seems to be running weak and popping and farting a lot, will test this weekend to see if anything changes.
No comments:
Post a Comment